| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel FTP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the ftp, ftps and sftp schemes, all of which are affected. The reporter demonstrated the issue end to end against an ftp endpoint, driving a Camel route with a malicious server whose LIST response named a file outside the polled directory.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Azure Files component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the azure-files scheme. Its consumer derives from the same RemoteFileConsumer base class and composed the remote path through a plain concatenation helper, so it inherited the same unconstrained resolution. Reaching it requires a listing name that is not a single path segment, which the Azure Files REST service does not normally return; the exposure was corrected on the same basis as the other remote-file consumers rather than from a demonstrated proof of concept against this scheme.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream. |
| Improper Handling of Case Sensitivity vulnerability in Apache Camel Netty HTTP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The camel-netty-http security constraint compared the request path against the configured context path using a case-sensitive match, while the routing that dispatches the request to the endpoint did not apply the same rule. The two comparisons therefore disagreed for any path whose case differed from the configured value. An external caller could alter the case of a character in a path segment so that the security constraint no longer recognised the path as protected, while the request still dispatched to the same endpoint. The result is that the constraint is skipped and the protected route is reached without satisfying it. No credential, prior access or special configuration is required beyond being able to send a request to the consumer.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The constraint now matches the request path with the same case rules the dispatch uses, so the two can no longer disagree. For deployments that cannot upgrade immediately, place the authorization decision in front of the Camel consumer, for example in a reverse proxy that normalises the request path before forwarding. |
| Server-Side Request Forgery (SSRF) vulnerability in Apache Camel AS2 component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
In the AS2 protocol the sender of a message may request that the Message Disposition Notification be returned asynchronously to an address the sender supplies. camel-as2 took that address from the inbound message and used it as the destination for the outgoing receipt without constraining it to anything the deployment had configured. A remote partner therefore chose the host the Camel instance would connect to when delivering the MDN. That gives server-side request forgery from the position of the AS2 receiver, including reaching hosts that are only routable from inside the deployment's network, and where the outbound connection carries credentials configured for MDN delivery those credentials are presented to the attacker-chosen destination.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The asynchronous MDN destination is now constrained rather than taken verbatim from the inbound message. For deployments that cannot upgrade immediately, restrict outbound connectivity from the AS2 receiver to the partner endpoints it legitimately delivers receipts to, and do not attach credentials to MDN delivery that are valid for any host other than those partners. |
| Permissive Cross-domain Policy with Untrusted Domains vulnerability in Apache Camel Platform HTTP Vertx component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
createCorsHandler() set Access-Control-Allow-Credentials: true outside the origin check, so the header went out on every response to a request carrying an Origin header, including responses to origins the handler had just decided not to allow. When camel.server.cors.origins is unset, the handler treats every origin as allowed and echoes the caller's own Origin back as Access-Control-Allow-Origin. Together those produce the credentialed any-origin configuration that the fetch specification refuses to express as a literal wildcard, which is precisely why reflecting the origin is the usual way around that rule. A page on any origin could therefore make credentialed cross-origin requests to the Camel endpoint and read the responses.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Access-Control-Allow-Credentials is now sent only when the request origin matched an origin the operator actually configured. With no origin list the origin is still reflected, as before, but credentials are not granted, and Vary: Origin is now set whenever the origin is reflected so that a shared cache cannot serve one origin's response to another. For deployments that cannot upgrade immediately, set camel.server.cors.origins to the explicit list of origins that need access rather than leaving it unset. |
| This issue affects Apache SIS from version 0.7 through 1.6 inclusive. When a data file contains links to other files, Apache SIS opened these files regardless their paths. It was possible, for example, to specify a path to a local file. However, these files were always expected to be in some specific formats and the reading stops at the first parsing error, which makes this vulnerability unlikely to leak sensitive information. The impacted formats are:
* Geographic Markup Language (GML) with `xlink:href` attributes for other files in GML format.
* Well Known Text (WKT) with parameter elements for datum shift grids in NADCON, NTv2 or RGF93 formats.
* Landsat scene with paths to files for each band in the GeoTIFF format.
Users are recommended to upgrade to version 1.7, which fixes the issue by restricting the paths to the same directory as the file containing the references to other files, or to a predetermined directory for datum shift grids. |
| Out-of-bounds read vulnerability in Apache Arrow Rust (`arrow` crate), from version 33.0.0 through to versions 57.3.1, 58.4.0, 59.3.1 and 60.0.0.
Improper validation of RunEndEncoded arrays in the ArrayData interface can allow reading data beyond the bounds of the child values array.
Users are recommended to upgrade to versions 60.1.0, 59.3.2, 58.4.1, 57.3.2 which fixes the issue. |
| ** UNSUPPORTED WHEN ASSIGNED ** Improper restriction of recursive entity references in DTDs ('XML entity expansion') vulnerability in Apache JClouds.
This issue affects Apache JClouds: all versions.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| ** UNSUPPORTED WHEN ASSIGNED ** Improper input validation vulnerability in Apache Oozie. An authenticated Oozie user can reconfigure another tenant's
workflow job and change its ownership.
This issue affects Apache Oozie: all versions.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| Apache HertzBeat versions 1.7.1, 1.7.2, 1.7.3, 1.8.0, and 1.9.0 have incomplete XPath expression validation in the HTTP collector XML parsing path. An authenticated user with permission to create monitor templates can supply XPath expressions through metrics.aliasFields that are evaluated without the validation applied to parseScript. When processing a crafted XML response, repeated evaluation may consume excessive CPU resources and impair collector availability. This is a follow-up to the incomplete fix for CVE-2026-24343. The fix is included in Apache HertzBeat 1.9.1. Users should upgrade to 1.9.1 or a later version. |
| Deserialization of Untrusted Data vulnerability in Apache Camel.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The camel-hazelcast component applies a default Hazelcast JavaSerializationFilterConfig to the instances it creates from its own configuration, a protection introduced by CVE-2026-43865. That change did not reach two of the configuration paths Camel builds itself, so those paths continued to create Hazelcast instances whose Java deserialization is unrestricted. ReplicatedHazelcastAggregationRepository extends HazelcastAggregationRepository but overrides doStart() without calling super.doStart(), keeping its own copy of the bootstrap block, and therefore never received the filter: a route using it without supplying a hazelcastInstance starts a Hazelcast member that deserializes values read from the backing ReplicatedMap with no class restriction. HazelcastDefaultComponent#getOrCreateHzClientInstance() builds its own ClientConfig when hazelcastMode=client is selected and neither a referenced ClientConfig nor hazelcastConfigUri is supplied, and likewise applied no filter, so client-mode endpoints behaved differently from node-mode endpoints for an otherwise identical configuration. In both cases an attacker able to publish into the Hazelcast cluster that the affected instance is attached to can cause a serialized Java object of their choosing to be deserialized inside Hazelcast's own serialization layer, before Camel processes the exchange, resulting in remote code execution. Hazelcast clusters have neither authentication nor TLS enabled by default. Selecting client mode is a topology choice rather than a security option, so neither path required the deployment to opt in to unsafe behaviour.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, supply an explicit Hazelcast configuration carrying a JavaSerializationFilterConfig, or inject a pre-built HazelcastInstance, since a user-supplied configuration is never overwritten by Camel. Alternatively set the JVM-wide filter -Djdk.serialFilter=!java.net.;java.;javax.;org.apache.camel.;!* and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster. |
| **UNSUPPORTED WHEN ASSIGNED** Unbounded allocation in XML parsing in Apache Vysper; all versions, may lead to an out of memory condition.
This issue affects all versions of Apache Vysper. Apache Vysper is an XMPP (Jabber) server library.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative. |
| **UNSUPPORTED WHEN ASSIGNED** Authorization bypass in Apache Vysper, all versions.
Apache Vysper is an XMPP (Jabber) server library. Its XEP-0077 (In-Band Registration) implementation is missing an authentication check, allowing any authenticated user to compromise other accounts.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative. |
| Insufficient Session Expiration vulnerability in Apache Camel Keycloak component.
This issue affects Apache Camel: from 4.16.0 before 4.18.5, from 4.19.0 before 4.22.2.
When token introspection is enabled on the camel-keycloak KeycloakSecurityPolicy (useTokenIntrospection=true), the security processor validates the access token of a request by sending it to Keycloak's OAuth 2.0 token introspection endpoint, and accepts the token while the response reports it as active. The introspection endpoint reports a token as inactive once its exp (expiration) time has passed, so on this path the active flag is what enforces token expiry. Introspection results are cached by default (introspectionCacheEnabled=true, introspectionCacheTtl=60 seconds), and both cache implementations shipped with the component, ConcurrentMapTokenCache and CaffeineTokenCache, expired an entry a fixed time after it was inserted, without bounding that lifetime by the exp claim that the cached response already carried. KeycloakSecurityProcessor in turn checked only the active flag of the result, on every path that uses introspection, and never compared exp with the current time. A response cached shortly before the token expired was therefore served to later requests carrying the same token for up to the configured time-to-live after the token's expiry, and those requests were admitted with the roles and permissions the expired token had carried, although RFC 7662, which defines token introspection, states that a response containing exp must not be cached beyond that time. The access token is supplied by the caller with each request, typically as a bearer token in the Authorization header, so a caller holding a token that was valid moments earlier could keep using it after it expired, for as long as the cached entry lived. The window is bounded by introspectionCacheTtl, which is 60 seconds by default and 300 to 600 seconds where the documentation's recommendation for internal services was followed, and it opens only for a token that the same Camel process introspected and cached while the token was still active. The issue grants nothing beyond what the token already carried: it allows no token forgery and no privilege escalation, and token introspection is not enabled by default, which is why the severity is assessed medium. The local JWT verification path, used when introspection is disabled, is not affected by this issue.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.16.x, 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, set introspectionCacheEnabled=false on the KeycloakSecurityPolicy, so that every request is checked against the introspection endpoint, which reports an expired token as inactive, at the cost of one introspection call per request. Lowering introspectionCacheTtl only narrows the window and does not close it. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Docling component.
This issue affects Apache Camel: from 4.15.0 before 4.18.5, from 4.19.0 before 4.22.2.
DoclingProducer runs the external docling tool in CLI mode, the default, and tells it where to write the converted document through the --output flag. When the CamelDoclingOutputFilePath header was set, addOutputDirectoryArguments handed its value to that flag verbatim: the value was not normalized, an absolute path or a path containing .. segments was accepted as given, and no endpoint option could confine it to a directory. The custom-argument validation added by the fix for CVE-2026-40047 refuses the --output and -o flags in the CamelDoclingCustomArguments header and tells callers to choose the output directory with this header instead, so the one value that decides where docling writes reached the command line without any of the checks applied to custom arguments. Docling writes the conversion result, as Markdown, HTML, JSON or text, into that directory, naming the file after the input file, and the producer afterwards removes only its own temporary directory, so the file is left in place. A party able to set the header could therefore have conversion output created in any directory the Camel process can write to. The content of such a file is the conversion of the document carried by the message, so it is shaped by whoever supplies that document without being written byte for byte, and when the document content arrives in the message body the producer stores it under a random temporary name, which the output file then carries. The header belongs to the Camel header namespace, which consumers applying Camel's default header filtering, such as the JMS and Kafka consumers, remove from incoming messages, so the issue is reached where a route forwards externally influenced values into the header or where a consumer maps incoming headers without that filtering. The docling-serve mode does not use the header.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The fix adds an outputBaseDirectory endpoint option that is unset by default, so after upgrading, set it on every docling endpoint whose CamelDoclingOutputFilePath header can carry a value influenced from outside the deployment; without it the header is normalized but can still name any directory. The 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not build the CamelDoclingOutputFilePath header from values that originate outside the deployment, remove that header from messages that arrive from outside before they reach a docling endpoint, and make sure that consumers which map incoming message headers drop the Camel header namespace, so that only the route itself chooses the output directory. |
| Improper isolation or compartmentalization vulnerability in Apache Syncope.
An administrator with adequate entitlements for Implementations can create a malicious Groovy class running untrusted code on a separate Thread, thus bypassing the Groovy security sandbox.
This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 through 4.0.8, from 4.1.0-M0 through 4.1.3.
Users are recommended to upgrade to version 4.0.9 / 4.1.4, which fix this issue. |
| Authorization bypass through User-Controlled key vulnerability in Apache Syncope.
A delegated administrator can relocate a Realm subtree across administrative realm boundaries without permission for the destination
This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 through 4.0.8, from 4.1.0-M0 through 4.1.3.
Users are recommended to upgrade to version 4.0.9 / 4.1.4, which fix this issue. |
| Improper Privilege Management vulnerability in Apache Syncope.
AuthProfile self-updates allow non-admin users to configure impersonation for WA surrogate authentication.
This issue affects Apache Syncope: from 3.0.12 through 3.0.16, from 4.0.0-M0 through 4.0.8, from 4.1.0-M0 through 4.1.3.
Users are recommended to upgrade to version 4.0.9 / 4.1.4, which fix this issue. |
| Improper isolation or compartmentalization vulnerability in Apache Syncope.
An administrator with adequate entitlements can import arbitrary BPMN process definitions via the REST API and then start the process. When a BPMN process containing a JUEL expression is imported and started, the expression is executed directly on the server, with no sandbox.
This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 through 4.0.8, from 4.1.0 through 4.1.3.
Users are recommended to upgrade to version 4.0.9 / 4.1.4, which fix this issue by rejecting BPMN definitions including expression attributes. |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel CoAP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.2.
When the CoAP consumer could not build its response once the route had completed, CamelCoapResource caught the resulting exception and sent its message back to the CoAP client as the payload of a 5.00 Internal Server Error response. The typical case is a type conversion failure: the consumer converts the final message body to the byte[] payload, and the CamelCoapMaxAge and CamelCoapETag headers to their types, after the route has returned, and therefore outside the route's error handler. On the affected releases the message of such a failure names the class of the value being converted, carries the value's string form, and ends with the class name and message of the underlying cause, so a remote CoAP client could read internal detail about the deployment: class and package names, the string form of the value, such as the path of a file body, and whatever the cause carries, which in practice can include paths, host names and connection detail of a backend. The consumer had no option to suppress this, unlike the HTTP consumers, which offer a muteException option for that purpose. The exception raised by a failing route was not sent: the consumer did not check whether the exchange had failed, and answered a route failure with 2.05 Content and whatever body the message held at that point. Reaching the disclosure therefore requires a route whose completed response a remote client can make unconvertible, which depends on how the route is written.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. The upgrade is enough on its own: the new muteException consumer option defaults to true on all three fixed release lines, so the error response carries no payload without any configuration change. For deployments that cannot upgrade immediately, make sure the response can always be built once the route has completed: convert the body to byte[] or String as the last step of each route that consumes from a coap endpoint, for example with convertBodyTo, give the CamelCoapMaxAge and CamelCoapETag headers only values of their own types, and add an onException handler that marks the failure as handled and sets the response body explicitly, so that a conversion failure is raised and replaced inside the route rather than in the consumer. |
