Export limit exceeded: 395623 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 395623 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395623 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-92525 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Validate num_sge/cur_sge before indexing wqe->dma.sge[] For a user QP, qp->sq.queue is a ring the application writes directly, so rxe_post_send() takes the is_user branch and only schedules send_task without validating the WQE. rxe_requester() consumes it in place via req_next_wqe() and calls copy_data(), which indexes &wqe->dma.sge[cur_sge] with the attacker-controlled num_sge/cur_sge. Only the kernel path bounds num_sge (validate_send_wr()); the user WQE is never checked, so a local unprivileged user can post a WQE with an out-of-range cur_sge or oversized num_sge and force an out-of-bounds read of the per-WQE sge array in copy_data() (vmalloc OOB read, local DoS). Bound num_sge to qp->sq.max_sge in rxe_requester() before use, the way get_srq_wqe() already guards SRQ entries, and bound cur_sge only when the WQE carries payload (dma.resid): copy_data() returns early on a zero-length copy before touching dma->sge[], so a zero-payload WQE -- the only kind a max_sge == 0 QP can post -- stays valid. Reproduced under KASAN; the vmalloc-out-of-bounds in copy_data() is gone. | ||||
| CVE-2026-93854 | 2026-09-19 | N/A | ||
| In OpenStack Blazar before 17.0.1, the V2 lease API does not enforce object-level authorization on its update and delete operations (PUT /v2/leases/{lease_id} and DELETE /v2/leases/{lease_id}). The policy authorize() wrapper attempts to load the target lease to build the authorization target from its owner, but it looks up the lease under the keyword "lease_id" whereas the controller methods name the parameter "id" (and the wsme_pecan.wsexpose wrapper delivers it positionally). The lookup returns None, and thus authorization falls back to the requesting user's own project_id/user_id instead of the target lease owner. Any authenticated user who knows a lease ID can therefore modify or delete leases belonging to other users and projects, bypassing the intended ownership check. | ||||
| CVE-2026-82672 | 1 Elixir-mint | 1 Mint | 2026-09-19 | N/A |
| Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling') vulnerability in elixir-mint mint allows a malicious HTTP/1 server to desynchronize a strict intermediary and the Mint client on a pooled connection, enabling response-queue poisoning against subsequent requests that share the connection. Mint.HTTP1.Parse.chunk_size/1 in lib/mint/http1/parse.ex stops at the first non-hexadecimal byte of a chunked response's chunk-size line and returns the remainder unexamined. Mint.HTTP1.decode_body/5 in lib/mint/http1.ex then discards every byte up to the CRLF with Parse.ignore_until_crlf/1, so the accepted grammar is a run of hex digits followed by arbitrary bytes, where RFC 9112 permits only a ;-introduced chunk extension. Lines such as 5ZZZZZ and 5 9 are accepted as chunk size 5, and 0ZZZZ is accepted as the terminating chunk that ends the message body. An RFC-strict intermediary rejects such a line while Mint accepts it, so the two disagree on chunk boundaries and on where the response ends. This issue affects mint: from 0.1.0 before 1.10.1. | ||||
| CVE-2026-93037 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Propagate sdma_txinit_ahg() errors set_txreq_header_ahg() ignores the return value of sdma_txinit_ahg(). If sdma_txinit_ahg() fails, it returns before initializing tx->txreq. However, set_txreq_header_ahg() ignores the error and returns the AHG change count, causing the caller to continue processing the request as though initialization had succeeded. Propagate sdma_txinit_ahg() failures to the caller and abort request processing when initialization fails. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-93039 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: meson: Keep link pointers valid on realloc failure meson_card_reallocate_links() grows the DAI link and private data arrays with two consecutive krealloc() calls and updates the owner pointers only after both calls have succeeded. A successful krealloc() may move the data: it frees the old block and returns a new one. When that happens for the link array and the second krealloc() then fails, card->dai_link still points to the block that krealloc() already freed, and the error path frees the new block too. The probe error path then calls meson_card_clean_references(), which dereferences card->dai_link and kfree()s it again, resulting in a use-after-free and a double free. Commit card->dai_link and card->num_links right after the first krealloc() succeeds, so the pointer always refers to a valid allocation that meson_card_clean_references() can walk and free. krealloc() with __GFP_ZERO zero-initializes the added entries, so walking them on the error path is safe. With both failure paths reduced to a plain return, drop the goto labels and the error message. | ||||
| CVE-2026-93042 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Terminate all descriptors without callbacks The DMA Engine client documentation says in the "Terminate APIs" section of Documentation/driver-api/dmaengine/client.rst: "No callback functions will be called for any incomplete transfers." dw-edma instead calls vchan_cookie_complete() when a deferred STOP reaches the interrupt handler. This schedules a callback for the active descriptor and leaves other issued or submitted descriptors queued. A late callback after dmaengine_terminate_sync() can dereference client state that has already been freed, while leftover descriptors may later restart into reused buffers or leak. Move all issued and submitted descriptors to the terminated list whenever termination completes. For a pending STOP, do this from both the DONE and ABORT paths. Complete their cookies in order without scheduling callbacks. A STOP can remain pending until the running transfer raises an interrupt. Make device_synchronize() wait for such a pending STOP to complete before releasing terminated descriptors. Reuse it from free_chan_resources(), then release the remaining virt-dma resources. Sleep instead of busy-polling while waiting, and warn if the existing timeout expires. | ||||
| CVE-2026-93054 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: uio: Fix stale info pointer in failed registration path After device_add(), the UIO device is visible to userspace and /dev/uioX can be opened. If a later setup step fails, __uio_register_device() unwinds the device but leaves idev->info pointing at the caller-owned struct uio_info. That is unsafe when an opener races with the failed registration path. The open file keeps a reference to the uio_device, while the caller sees registration failure and may free its struct uio_info. Later file operations can then follow idev->info and dereference freed memory. Handle post-device_add() failures like unregister: remove UIO attributes while the info pointer is still valid, then clear idev->info under info_lock and wake existing waiters/async users before removing the device and minor. This makes already-open file descriptors observe the same "device gone" state as normal uio_unregister_device(). | ||||
| CVE-2026-93063 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mei: check SAP message length before reading it Verify the SAP message size is not larger than the local buffer before reading the message to avoid buffer overflow. | ||||
| CVE-2026-93079 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl/features: Reject Get Feature count larger than the output buffer cxlctl_get_feature() sizes its output buffer from the user's fwctl_rpc.out_len, but the device is told to write cxl_mbox_get_feat_in.count bytes into rpc_out->payload, which is a separate user-controlled value. Nothing bounds count against out_len, so a small out_len with a large count overflows the kvzalloc()'d buffer. A heap OOB write reachable from FWCTL_RPC. Reject requests where count exceeds the available payload room, before allocating. | ||||
| CVE-2026-93095 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: validate thread record before delete key rebuild hfsplus_delete_cat() is called with str == NULL when the last open reference to an unlinked HFS+ hardlink backing inode is closed. In that case, the function finds the catalog thread by CNID and rebuilds the catalog key from thread.nodeName. That reconstruction path reads thread.nodeName.length directly from the catalog B-tree into fd.search_key and then copies length * 2 bytes into fd.search_key->cat.name.unicode. It does not first check that the found record is a thread record or that its size matches the thread name. A corrupted image can therefore provide an oversized thread name length and make hfs_bnode_read() write past the catalog search-key allocation. Read the CNID record through hfsplus_brec_read_cat(), which bounds the record read to sizeof(hfsplus_cat_entry) and verifies that a thread record's size exactly matches nodeName.length. Together, these checks ensure an accepted thread name fits HFSPLUS_MAX_STRLEN. Reject non-thread records before building the delete key from the validated thread name. Share the thread-record-type helper between hfsplus_find_cat() and hfsplus_delete_cat(). | ||||
| CVE-2026-93111 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark tracing_multi trampolines as ftrace managed Since tracing_multi link does not set ftrace_managed, it would fail to release the tracing_multi link when attaching tracing_multi link and then attaching fentry link. [ 3.714215] WARNING: kernel/bpf/trampoline.c:1727 at bpf_trampoline_multi_detach+0x20b/0x240, CPU#1: test_progs/97 ... [ 3.733170] bpf_tracing_multi_link_release+0x14/0x30 [ 3.733890] bpf_link_free+0x58/0x130 [ 3.734414] bpf_link_release+0x23/0x30 Fix it by setting 'ftrace_managed = true' in register_fentry_multi(). | ||||
| CVE-2026-93121 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix fence cleanup in ffs_dmabuf_transfer() error paths The error paths for endpoint-disabled (ESHUTDOWN) and request-allocation failure (ENOMEM) in ffs_dmabuf_transfer() jump to err_fence_put which calls dma_fence_put() on the fence. However, at that point the fence has only been kmalloc'd — dma_fence_init() has not been called yet, so the refcount and the fence ops are uninitialized. Calling dma_fence_put() on such an object leads to undefined behavior. Use kfree() instead, since the fence is just a plain allocation at this stage, and rename the label to err_fence_free to reflect the actual cleanup action. | ||||
| CVE-2026-93122 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uac: validate rate list length before storing UAC1 and UAC2 configfs rate-list attributes parse a comma-separated list of sampling rates and store each parsed value in fixed-size arrays. The arrays have UAC_MAX_RATES entries, but the store paths do not check that the input contains at most that many tokens before writing through opts->name##s[i++]. Writing more than ten rates therefore writes past the end of the p_srates[] or c_srates[] array in struct f_uac1_opts or struct f_uac2_opts. With CONFIG_UBSAN_BOUNDS enabled, writing an 11-entry rate list to the UAC1 p_srate attribute reports: UBSAN: array-index-out-of-bounds drivers/usb/gadget/function/f_uac1.c:1669:1 index 10 is out of range for type 'int [10]' __ubsan_handle_out_of_bounds.cold f_uac1_opts_p_srate_store configfs_write_iter vfs_write ksys_write do_syscall_64 The same reproducer against the UAC2 p_srate attribute reports: UBSAN: array-index-out-of-bounds drivers/usb/gadget/function/f_uac2.c:2087:1 index 10 is out of range for type 'int [10]' __ubsan_handle_out_of_bounds.cold f_uac2_opts_p_srate_store configfs_write_iter vfs_write ksys_write do_syscall_64 Reject additional tokens once UAC_MAX_RATES entries have been parsed. Also keep the original kstrdup() pointer for kfree(), because strsep() advances the parsing cursor. Freeing the advanced cursor leaks the original buffer on successful parses and can free an interior pointer on some error paths. | ||||
| CVE-2026-93127 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Drop scalar id on sign-extending narrowing stack fills When a spilled scalar is filled back with a sign-extending narrowing load (BPF_MEMSX), check_stack_read_fixed_off() copies the spilled register including its scalar id, but coerce_reg_to_size_sx() then sign-extends the filled register's value. If the same slot is also filled with a plain zero-extending load (BPF_MEM), both destination registers share the id yet hold different values. A later 'if <zext-reg> == const' then refines the sign-extended register through sync_linked_regs() to a value it does not have at runtime (e.g. the verifier believes 0x80000000 while the register is 0xffffffff80000000), which can be turned into an out-of-bounds access. Drop the shared scalar id at the sign-extension site in check_mem_access() when sign extension actually changes the value, mirroring the BPF_MOVSX handling in check_alu_op() (no_sext = reg_umax < 2^(size*8-1)). | ||||
| CVE-2026-93137 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free on mm_struct in bpf_find_vma() bpf_find_vma() reads task->mm and calls mmap_read_trylock(mm) without holding a reference on the mm. On a foreign task, a concurrent exit_mm() can free the mm_struct between the lockless read and the trylock, resulting in a use-after-free. mm_struct is not SLAB_TYPESAFE_BY_RCU. For the current task, task->mm is stable. For a foreign task, pin the mm under task->alloc_lock and release it with mmput_async(), mirroring commit d8e27d2d22b6 ("bpf: fix mm lifecycle in open-coded task_vma iterator"). Use spin_trylock() instead of get_task_mm() so BPF context does not block on alloc_lock. Reject irqs-disabled contexts and !CONFIG_MMU on the foreign-task path because dropping the mm reference is not safe there. Race: CPU0 (BPF program) CPU1 (exiting task) ============================ ========================== bpf_find_vma(foreign_task): mm = task->mm exit_mm(): task->mm = NULL mmput(mm) -> frees mm_struct mmap_read_trylock(mm) // UAF on mm | ||||
| CVE-2026-93144 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject writes through untrusted BTF pointers check_ptr_to_btf_access() lets program-type btf_struct_access callbacks validate writes before the default BTF access path rejects non-read accesses. That bypasses the read-only policy for untrusted BTF pointers created by helpers such as bpf_rdonly_cast(). Reject non-read accesses through PTR_UNTRUSTED BTF pointers at the common entry point, before the callback branch to handle all cases. | ||||
| CVE-2026-93147 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/bpf: Replace ly instruction with llgf cpu_nr is a 32 bit value and BPF_REG_0 is a 64 bit register, when ly loads the cpu_nr into BPF_REG_0 it does not zero the upper bits, but llgf does. | ||||
| CVE-2026-93148 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject MEM_ALLOC BTF accesses past object bounds BTF struct walks relax the struct-size check for accesses through a trailing flexible array. That is valid for ordinary BTF type walking, but PTR_TO_BTF_ID | MEM_ALLOC values point to objects allocated with the static BTF type size. When walking a MEM_ALLOC object, reject the access before applying the flexible-array relaxation if the access range extends past the struct size. Apply the same policy to struct ID matching so kfunc and kptr type checks do not walk past the allocated object bounds either. | ||||
| CVE-2026-93151 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: fix response resource leak on queue teardown When an nvme target with rdma transport is removed while I/Os are in flight, a response can be posted but its send completion is never delivered before the connection is torn down. As a result nvmet_rdma_send_done() and nvmet_rdma_release_rsp() are never called for the response, and this leaks the allocated RDMA read/write context and request SGLs. These leaks are recreated by running blktests nvme/061 with the rdma transport and the siw driver. Kernel kmemleak feature reports them as follows: unreferenced object 0xffff88812bc490c0 (size 32): comm "kworker/2:1H", pid 409, jiffies 4307744490 backtrace (crc 89afd339): __kmalloc_noprof+0x5f9/0x890 sgl_alloc_order+0x7b/0x380 nvmet_req_alloc_sgls+0x290/0x4f0 [nvmet] nvmet_rdma_map_sgl_keyed+0x241/0x12e0 [nvmet_rdma] nvmet_rdma_handle_command+0x73e/0xb80 [nvmet_rdma] __ib_process_cq+0x149/0x4c0 [ib_core] ib_cq_poll_work+0x49/0x160 [ib_core] process_one_work+0x8b2/0x1640 worker_thread+0x5fd/0xfe0 kthread+0x367/0x460 ret_from_fork+0x655/0x9d0 ret_from_fork_asm+0x1a/0x30 unreferenced object 0xffff88814bd05e80 (size 64): comm "kworker/3:1H", pid 148, jiffies 4295195428 backtrace (crc e35510cb): __kmalloc_noprof+0x5f9/0x890 rdma_rw_ctx_init+0x333/0x1fa0 [ib_core] nvmet_rdma_map_sgl_keyed+0x5c8/0x12e0 [nvmet_rdma] nvmet_rdma_handle_command+0x73e/0xb80 [nvmet_rdma] __ib_process_cq+0x149/0x4c0 [ib_core] ib_cq_poll_work+0x49/0x160 [ib_core] process_one_work+0x8b2/0x1640 worker_thread+0x5fd/0xfe0 kthread+0x367/0x460 ret_from_fork+0x655/0x9d0 ret_from_fork_asm+0x1a/0x30 To avoid the memory leaks, reclaim the memory of the in-flight responses when the queue QP is torn down. Call nvmet_rdma_free_rsp_resources() that frees up the RDMA read/write context and the request SGLs of such responses. | ||||
| CVE-2026-93165 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/chrome: sensorhub: Fix memory overread in ring handler `max_response` and `sensor_num` are read from different EC commands: - `max_response` is from cros_ec_get_proto_info(). ec_dev->max_response = info->max_response_packet_size - sizeof(struct ec_host_response); - `sensor_num` is from cros_ec_get_sensor_count(). sensor_num = cros_ec_get_sensor_count(ec); With a malfunctioning EC firmware, it is possible that the `msg->insize` (i.e., `fifo_info_length` in the context) could be clamped in cros_ec_cmd_xfer() because `msg->insize` is greater than `max_response`. int fifo_info_length = sizeof(struct ec_response_motion_sense_fifo_info) + sizeof(u16) * sensorhub->sensor_num; This means the number of read bytes could be less than expected. As a result, the subsequent memcpy() in cros_ec_sensorhub_ring_handler() overreads the `resp->fifo_info` buffer. Check the return value of cros_ec_cmd_xfer_status() and abort if the number of bytes read does not match the expected length. | ||||